CEMAX F-300 is specially formulated with third generation super plasticizer based on polycarboxylate ether polymer with long lateral chain. CEMAX F-300 is used to produce rheology modified concrete based on modified synthetic carboxylate polymer and, suitable for wide range of concrete grades and intended for application of High performance concrete.
APPLICATIONS
CEMAX F-300 is particularly suitable for precast concrete and special performance concrete of prestress structure with early concrete strength requirement.
ADVANTAGES
? Provides high early strength concrete without increase in cement content.
? Because of low water cement ratio, reduces the risk of shrinkage crack.
? Can perform the concrete water impermeable
? Suitable for Precast concrete work.
? Suitable for other cement replacement additive of fly ash and Silica fume.
Advantage for concrete structural member,
? Resistance to carbonation
? Shrinkage and creep reduction
? Increase durability
? Water impermeability can advantage to low risk in structural steel corrosion
PROPERTIES
Nature: Liquid
Appearance: Brownish liquid
Type: Super plasticizer
Class: ASTM C-494 Type ?A & F , BS EN 934-2
Specific Gravity: (25°C) 1.08 ± 0.02g/cm³
DOSAGE
Dosage rates vary dependent on mix design, process,
Aggregate type and the desired effect but typically: 0.7% - 1.5% by weight of cement (binder).
The correct dosage should always be determined by laboratory and batch trials.
STANDARDS
CEMAX F-300 complies with the requirements of BS EN 934-2 and ASTM C-494
STORAGE
CEMAX F-300 should be stored undercover and protected from extreme temperatures, if stored between the range 5°C to 40°C the product will have a minimum shelf life of 12 months.
PACKAGING
20 liters pail,200 liters drum and 1000 liters IBC tank.